Services

Home Inspections

The home inspection fee is $120 per hour with a minimum one hour charge. Most homes can be measured in 1-2 hours depending on size.  During a home inspection I measure the dirty electricity levels in the home, the wireless in and outside the home, ground current, and identify problematic magnetic fields.  A written report can be provided but it is a separate charge and based on the hourly charge above.   A travel fee may be added for locations further than 1 hour from Altoona, WI.   Please contact me for more information if this applies to you.

If you live farther than 1 hour away consider doing a virtual inspection.  There are two tiers of inspection.

Cost for a Tier 1 virtual inspection is $750.  In a Tier 1 virtual inspection you will receive the following equipment to use for one week: HF 35C, Trifield 100XE,  and a Fluke 189.

The cost of the Tier 2 inspection is $950.  With a Tier 2 inspection you will receive the following equipment to use for one week: HFE 35C, HFW 35C, Trifield 100XE, and a Fluke 287.

Both tiers will also receive a Microsurge Meter and 10 Stetzerizer filters to use and keep at the end of the inspection.  I then work with you over the phone or through Skype to answer any questions you have and to explain the readings that you are seeing.  I will also explain how you can reduce these numbers.  This is the best way to find out if there are any problem areas in your home.  At the end of the inspection, you will send back the Tier 1 or 2 equipment back using prepaid postage.  Failure to return equipment, returning damaged equipment, or keeping the equipment longer than one week will result in extra charges.

The main difference between Tier 1 and Tier 2 is the frequency range that you can detect with the wireless meters.  Tier 1 range is 800 MHz to 2700 MHz.  Tier 2 range is 27 MHz to 6000 MHz.

I also offer consulting over the phone or through video chat at a rate of $30 per 15 minutes.

If you would like to set a time for a consult or inspection please contact me by emailing  darnell@flutterbusters.com

 

Products

If you are interested in ordering filters and/or a Microsurge Meter, these are both available for sale.  The Stetzerizer Filters cost $27.50 per filter and the Stetzerizer Microsurge Meter is $90.  Shipping and handling is $9.95.   Click here to access the Flutter Buster Store.

Advertisements